Kajaran Pishro Polymer Industrial Complex ( knowledge – based )

Filters

Filters

Filters

1-Automatic Continuous self-Cleaning filter is a new method with high output in recycling industry of polymer materials , This kind of filter ( Screen Changer ) does not require a stop during the production for Filter replacement and anytime that Filter screen has blockage and so the pressure behind the filter increase ,  Wastes accumulated behind the filter screen are automatically wiped out. Also this filter is equipped by separate PLC panel than machines main panel .

2-Continuos Filters are suitable for Recycling of Polymer materials with high impurity . these filters require no machine stop for filter replacement . for this kind of filters, replacing filter gates happen without any shocks and pressure change behind the die .Filter replacement is executed by hydraulic jack and is equipped by Pressure sensor , Micro switch and timer . Switchboard is equipped by PLC and hydraulic unit . these filters are offerable in variety of sizes .

3-Hydraulic Screen Filter   , which has two gates for getting impurities of polymer materials   , is suitable for Polymer Recycling Extruders   .Filter replacement can be done manually and by Hydraulic jack . these filters are equipped by power pack and supplied in different sizes .

Cylindrical one gate filter is suitable for production of variety of products which has one gate for catching material impurities . Its replacement is done by hydraulic jack manually . this filter is equipped by power pack and for filter replacements, the electrical panel is installed on extruder . in such filters , filter mesh replacement is done manually and is supplied in variety of sizes .

 

حجم موادگیری 

قطر صفحه فیلتر

ظرفیت (Kg/h)

مدل

750

320 Ø

800

TOTA 320

110

400 Ø

1200

TOTA 400

1800

500 Ø

2000

TOTA 500

2600

600 Ø

2700

TOTA 600

فیلتر استوانه ای دائم کار

فیلترهای دائم کار مناسب برای بازیافت مواد پلیمری با درصد ناخالصی بالا می باشد. این فیلترها نیازی به توقف دستگاه در هنگام تعویض توری ندارند. در این نوع فیلترها عملکرد تعویض دریچه های توری بدون ایجاد شوک و تغییر فشار پشت هد می باشد. تعویض توری به وسیله جک هیدرولیکی انجام می گیرد و مجهز به سنسور فشار، میکروسوییچ و تایمر می باشد. تابلو فرمان مجهز به PLC و یونیت هیدرولیکی می باشد. این فیلترها در سایزهای مختلف قابل ارائه می باشند.  

ظرفیت ( Kg/h)

قطر صفحه فیلتر (mm)

مدل
150 ~ 100

90

65/50

250 ~ 150

120

90/75

450 ~ 250

150

120/100

700 ~ 450 200

150/130

فیلتر هیدرولیکی صفحه ای

فیلتر هیدرولیکی صفحه ای مناسب برای اکسترودرهای بازیافت مواد پلیمری می باشد که دارای دو دریچه جهت گرفتن ناخالصی های مواد پلیمری است. تعویض توری به صورت دستی و توسط جک هیدرولیکی صورت می گیرد این فیلترها مجهز به پاورپک بوده و در سایزهای مختلف قابل ارائه می باشد.  

ظرفیت(Kg/h)

قطر صفحه فیلتر (mm)

مدل

80 ~ 0 140 65/50
200 ~ 100 175 90/75
500 ~ 200 215 120/100
1000 ~ 500 335 150/130

فیلتر استوانه ای ثابت با یک دریچه

فیلتر استوانه ای تک دریچه مناسب برای تولید انواع محصولات می باشد که دارای یک دریچه جهت گرفتن ناخالصی های مواد می باشد. تعویض آن توسط جک هیدرولیکی به صورت دستی صورت می گیرد این فیلتر مجهز به پاورپک بوده و تابلو برق آن جهت تعویض توری روی اکسترودر نصب می گردد. در این نوع از توری ها تعویض مش توری به صورت دستی انجام می گیرد و در سایزهای مختلف قابل ارائه می باشد.  

ظرفیت( Kg/h)

قطر صفحه فیلتر (mm)

مدل

100 ~ 50

90

65/50

200 ~ 100

120

90/75

400 ~ 200

150

120/100

600 ~ 400 200

150/130

Leave a Comment

Your email address will not be published. Required fields are marked *

× چگونه می‌توانم به شما کمک کنم؟